
Position with precision.
Guide the implant toward the ideal restorative position. Designed to support better aesthetics, bite, and long-term care.
OsseoFuse® OneDrill System

OsseoFuse® is designed to simplify dental implant treatment by streamlining both the clinical workflow and the patient experience. Its OneDrill® system reduces the number of drilling steps and procedural complexity.2 High primary stability can support immediate treatment options in appropriately selected cases.2,5 By bringing key steps together into a more efficient workflow, OsseoFuse may help reduce chair time and, in suitable cases, the number of separate treatment stages.2,5,8 For selected sinus cases, SinusFuse® integrates implant placement, sinus elevation and autogenous bone management into one coordinated workflow.6
Proven and Trusted Worldwide

More than
300,000
implants placed worldwide
Across
8 Global
regions regulatory approvals
OneDrill®
With fewer instruments and a simplified drilling sequence, OneDrill® is designed to be easier for clinicians to learn and navigate. Less time is spent selecting and changing drills, allowing clinicians to focus more attention on treatment planning, precise placement, and patient care.2
Side-Cutting
Not every osteotomy begins perfectly. The side-cutting drill allows clinicians to make controlled lateral adjustments, refine positioning, and navigate challenging anatomy with greater confidence.2

Guide the implant toward the ideal restorative position. Designed to support better aesthetics, bite, and long-term care.

Make small lateral adjustments when needed. Better positioning helps support a more natural-looking, functional result.

Widen only where necessary. Selective cutting helps conserve healthy bone around the implant site.

Navigate extraction sockets, irregular bone, and limited space with greater control. Giving clinicians more flexibility in challenging cases.
Step-Interlocking

Step-Locking is designed to create mechanical engagement at multiple levels of the osteotomy without relying solely on generalized compression of the surrounding bone.2
For clinicians, it means greater confidence from placement through healing. For patients, it means less unnecessary bone trauma, a stable foundation, and a smoother journey toward a lasting smile.

After a tooth is removed, the surrounding bone naturally begins to remodel. OsseoFuse is designed for high primary stability, allowing the implant to achieve secure fixation at the intended bone level.
This allows your dentist to work with the bone that is already there, without unnecessarily altering the natural bone level simply to gain implant stability.

The implant is placed to achieve good initial stability while staying aligned with where the replacement tooth should naturally sit. Instead of tilting the implant simply to search for more bone, the aim is to keep it in a favorable position for the future restoration.5
This helps the replacement tooth look more natural, bite more comfortably, and function better over the long term.

When adequate primary stability is achieved, a healing abutment can be connected immediately. This allows the gum to begin healing around the implant from day one. In suitable cases, it can also avoid a separate procedure later to uncover the implant.8
For patients, that may mean one less surgical visit, one less local anaesthetic, fewer surgical steps, and a more comfortable treatment journey.

One week later, the gum is already beginning to heal around the implant and healing abutment. By preserving the surrounding bone, achieving good initial stability, and keeping the implant in the intended position from the start, treatment begins with a strong foundation for the replacement tooth.5
From extraction to healing, every step is designed to preserve more, intervene less, and position the implant where it can best support your new smile.
5-in-1 Treatment
For appropriately selected cases, the OsseoFuse 5-in-1 concept brings extraction, implant placement, sinus elevation when required, bone grafting and placement of a healing abutment and/or provisional restoration into one coordinated surgical appointment.8

Remove the failing tooth while preserving the site for immediate Implant treatment.

Elevate the sinus membrane to create the vertical space required for implant placement.

Place graft material beneath the elevated sinus membrane to augment the implant site

Position the implant within the prepared site during the same surgical visit

Where primary stability and clinical conditions permit, provide an immediate provisional restoration.
Enjoy greater comfort and function while you heal, when clinically suitable.
Avoid being left without a visible tooth where immediate restoration is suitable.
Combine key procedures into one visit, reducing the need for separate surgical appointments.
Move forward with your recovery and everyday routine.
OsseoFuse makes surgery simpler, reducing surgical intervention times, increasing patient satisfaction.
What's most amazing is that it can handle almost all complicated cases. We've only just started using it.
Dr. Celine Chang
Harvest Dental Care
I now have the ability to handle cases that used to require sinus lift surgery before implantation.
I truly admire Dr. Leon Chen’s exceptional perspectives. He has designed such simple and effective techniques that have allowed me to advance in a very short period of time. The concept of subtraction is gradually being applied in many aspects, which is fantastic.
Dr. Tyron Jones
Happiness Dental Clinic
The simplification of drilling, when placing multiple implants, has saved me some time.
Usually, when placing multiple implants, I have to keep changing burs. With OsseoFuse, skipping the switching process makes the surgical process more efficient.
Dr. Dave Walker
New Classic Dental
At the age of 79, I had planned to retire until I discovered the Osseofuse onedrill system.
I was surprised by its simplicity. Now, at 82, I'm not ready to retire anytime soon. I placed an average of over 50 implants per month.
Dr. Hsu Long-Sean
Dr. Hsu Dental Clinic
Shorter chair time and less discomfort for patients.
OsseoFuse made me realize that among the numerous dental implant brands, there is a system that can simplify complexity.
Dr. Arman Nadim
Sun Dental Clinic
The products from OsseoFuse are the best dental implants I’ve ever used.
Especially for immediate implant immediate restoration cases, as well as sinus lift surgeries. I wholeheartedly recommend OsseoFuse to fellow dentists.
Dr. Tom Boujenah
Digital Smile Dental Clinic
The design streamlines immediate implant and restoration into one single surgery.
The use of just one single drill for implant site preparation eliminates the need for multiple drill changes, significantly reducing surgical time. The OsseoFuse system design exceeded my expectations.
Dr. Paul Schneider
Master Dental Clinic
I realized that dental implantation could be so simple, so effortless.
It wasn’t until 2020, when I coincidentally came across OsseoFuse, that my eyes were truly opened. I found that the doctor I hadn’t seen in 12 years had taken the treatment techniques to an unimaginable level!
Dr. Ayoub Lahlou
Lahlou Dental Clinic
FAQ
Straight answers about the OsseoFuse OneDrill® System, primary stability, immediate implant placement, SinusFuse, clinical evidence and practice workflow.
Understand what makes OsseoFuse different, from its streamlined drilling protocol to the 1 Drill, 1 Platform, 1 Kit concept.
The OsseoFuse OneDrill® System is designed to prepare an implant osteotomy using a single implant-matched stepped drill instead of progressing through a conventional sequence of increasingly wider drills.2
One drill incorporates the functions normally distributed across several instruments, including site initiation, guidance, progressive enlargement and depth control. That means fewer drill changes, fewer instruments to manage and a more streamlined surgical sequence.
It is part of the broader OsseoFuse philosophy: 1 Drill. 1 Platform. 1 Kit.
It is the core OsseoFuse system concept.
1 Drill means the primary osteotomy can be prepared with an implant-matched OneDrill® rather than a sequence of multiple diameter drills.2
1 Platform means OsseoFuse standardizes the restorative connection across compatible implant diameters, helping reduce the number of restorative components a practice needs to keep on hand.
1 Kit means the OsseoFuse Master Surgical Kit supports multiple OsseoFuse implant systems, including HexaPLUS, ConicalPLUS, OneBody, Element Z-40, Mini and SinusFuse.
The result is a more unified workflow with fewer drills, fewer kits and potentially less surgical and restorative inventory to purchase, sterilize, organize and train the team to use.
Traditional implant osteotomies commonly progress through several increasingly wider drills before the implant is inserted.
OsseoFuse integrates those stages into one stepped drill matched to the intended implant dimensions. Fewer drill changes can mean a simpler surgical sequence, fewer instruments on the tray and greater workflow efficiency, particularly when multiple implants are being placed.2
The system then extends that simplification beyond drilling through shared surgical instrumentation and a simplified restorative platform.
No. Fewer drills does not mean less precision.
The OneDrill® incorporates progressive stepped diameters, guidance and a physical stopper for depth control. Its lateral-cutting design also provides the clinician with an ability that can be difficult once a conventional straight osteotomy has been established: intraoperative redirection of the osteotomy when correction is required.2,4
Accuracy still depends on diagnosis, planning, anatomy, positioning, surgical execution and appropriate use of guided surgery where indicated.
This is one of the practical advantages of the stepped, lateral-cutting OneDrill® design.
The cutting flutes provide lateral cutting capability, allowing the clinician to redirect the osteotomy rather than being completely committed to the original trajectory once drilling has started. OsseoFuse training materials describe the system as allowing the angle to be adjusted multiple times during the procedure.2
This creates a greater degree of procedural tolerance and intraoperative correction than a purely axial drilling concept.
Potentially, yes.
Every drill change requires an additional instrument selection and surgical step. OneDrill® reduces repeated drill changes by integrating the conventional sequence into one stepped instrument.
That difference can become more meaningful as the number of implant sites increases. The advantage is not speed for its own sake. It is a simpler surgical workflow with fewer interruptions and fewer instruments to manage.2
Actual treatment time varies according to anatomy, case complexity, clinician experience and the procedure performed.
Explore step-locking, immediate extraction cases, loading considerations and how OsseoFuse approaches primary stability without relying simply on bone compression.
OsseoFuse combines its stepped osteotomy with implant geometry through a concept described as Step-Locking.
The OneDrill® creates alternating areas of prepared bone along the osteotomy. During insertion, the tapered implant body, active threads and lateral cutting features mechanically engage these areas at multiple levels.
Rather than relying simply on compressing the entire osteotomy, the objective is controlled points of engagement that help the implant lock into available bone.2
Strong primary stability can be particularly valuable in immediate extraction sites, low-density bone and other cases where obtaining mechanical stability is more challenging.
Yes, when the implant, patient, restoration and applicable regulatory indication allow it.
High primary stability is widely recognized as one of the key prerequisites when immediate or early loading is being considered. OsseoFuse's Step-Locking concept is designed to help clinicians obtain strong mechanical engagement at placement, which can expand the clinical possibilities for immediate provisionalization in appropriately selected cases.
However, primary stability alone does not determine whether an implant should be immediately loaded. Bone quality, implant position, occlusion, restorative design, patient factors and the product's Instructions for Use must also be considered.11
For example, the current U.S. FDA-cleared HexaPLUS S OneDrill Implant System under K243078 is indicated for delayed loading.10
Yes. Immediate post-extraction placement is a well-documented application within the OsseoFuse clinical literature.
The six-year retrospective HexaPlus study included implants placed in fresh extraction sites, and subsequent OneDrill® publications describe immediate extraction and implant-placement protocols.1
The advantage of the system in these cases is the combination of a streamlined osteotomy and implant design intended to obtain primary stability even when the geometry of a fresh socket makes stabilization more demanding.2,5
Immediate placement still depends on socket anatomy, available bone, infection control, implant positioning, soft tissue conditions and clinical judgment.
No. The mechanical concepts are different.
Osseodensification is designed to preserve, compact and densify bone around the osteotomy rather than remove it.
OsseoFuse uses a cutting approach. Its lateral cutting features and implant side-cutting grooves shave bone rather than relying on generalized compression. The implant geometry then uses those prepared areas as part of the Step-Locking mechanism for primary stability.
That distinction matters. OsseoFuse's stability concept should not be described simply as “compressing the bone.”2
Not inherently.
Heat generation during implant osteotomy is multifactorial. Drill design, sharpness and wear, rotational speed, applied pressure, drilling time, bone density and irrigation can all affect temperature.
The number of drills alone therefore cannot determine thermal risk.3
Clinicians should follow the prescribed OsseoFuse drilling protocol and adapt technique appropriately to the bone and clinical situation.
OsseoFuse incorporates contingency planning into its implant diameter sequence.
A published OsseoFuse case series describes failed implants being removed and, where the remaining anatomy permitted, replaced immediately in the original osteotomy with an implant two width sizes larger to re-establish primary stability.9
This provides the clinician with a planned rescue pathway rather than treating every failed implant as an entirely new surgical problem.
Whether immediate reimplantation is appropriate depends on the condition of the site, remaining bone, infection control and clinical judgment.
Understand how SinusFuse combines implant placement, autogenous bone management and sinus elevation in one integrated workflow.
SinusFuse® is OsseoFuse's implant concept developed specifically for selected posterior maxillary sites where limited residual bone height beneath the sinus complicates conventional implant placement.
Rather than treating implant placement and sinus elevation as completely separate procedures, SinusFuse incorporates sinus-floor management and autogenous bone transportation into the implant-placement process itself.6
SinusFuse does not generate new bone during insertion.
Its reverse-helical lateral cutting grooves shave the patient's existing autogenous bone as the implant advances. Those bone particles are then transported apically through the reverse cutting grooves and collected in the implant's concave, dish-like apical reservoir.
This mechanism is known as osseotransportation.
As the implant reaches the sinus floor, its apical design is used to up-fracture the remaining thin cortical floor while the reservoir of autogenous bone contributes to elevation of the Schneiderian membrane.6
In simple terms:
shave → transport → collect → elevate
All within the implant-placement workflow.
Osseotransportation is the process by which SinusFuse harvests and relocates the patient's own bone during implant insertion.
The reverse-helical cutting grooves shave autogenous bone from the osteotomy and transport those particles apically into the concave reservoir of the implant.
Importantly, this occurs without removing the harvested bone from the surgical site and transferring it through the external environment. The published 5-in-1 description specifically identifies this internal harvest-and-transport process as osseotransportation.6
This reduces additional bone handling and eliminates a separate donor-site harvesting step for that autogenous material.
Traditional sinus augmentation may require separate instruments, separate graft handling or a lateral-window or transcrestal elevation procedure before or alongside implant placement.
SinusFuse integrates several of these functions into the implant itself.
Its reverse cutting grooves shave and transport autogenous bone, its apical reservoir retains that bone beneath the membrane, and its apical design contributes to up-fracturing the remaining sinus floor.
Because the autogenous particles are transported internally from the osteotomy to the apical region, they are not separately harvested, exposed to the external environment and then transferred back into the site.6
That reduces handling and an opportunity for external contamination. It should not be marketed as proving a lower infection rate unless clinical comparative evidence establishes that outcome.
Membrane perforation remains a potential complication of any sinus-elevation procedure. SinusFuse does not make that risk zero.6,7
What is different is the mechanism at the apex.
The SinusFuse apical design is intended to up-fracture the final thin layer of sinus floor, rather than depend on aggressively cutting upward into the sinus membrane. At the same time, the concave apical reservoir collects autogenous bone between the implant and Schneiderian membrane.
That bone-filled interface creates a cushioning layer as the membrane is elevated, rather than presenting the membrane with only a bare advancing implant tip.6
Careful radiographic assessment, residual-bone evaluation, membrane integrity and surgical technique remain essential.
Not in every case.
SinusFuse's reverse cutting grooves supply autogenous bone from the patient's own osteotomy, which is transported to the apical reservoir during implant placement.
Depending on residual bone height, defect dimensions and the treatment plan, this autogenous bone may form part of the augmentation strategy. Additional graft material may still be indicated in more demanding cases.
The advantage is therefore not “no grafting ever.” It is the ability to harvest and transport autogenous bone automatically as part of implant placement.6
No.
A traditional osteotome technique uses separate instruments to mechanically displace the sinus floor and elevate the membrane.
SinusFuse incorporates the elevation mechanism into the implant itself. Its reverse-helical side cuts transport autogenous bone apically, while its apical design functions as a built-in osteotome during the final portion of advancement.6
It is also not limited to cases with 4 mm or more of residual bone. OsseoFuse's clinical SOP includes a specific pathway for 2 to 4 mm of residual sinus-floor thickness. Published HSC literature also reports use in very low residual-bone situations and states that implant placement can be performed at sites with as little as 2 mm of bone.
These are advanced cases that require appropriate training, diagnosis and case selection.
Review the published clinical evidence, regulatory status and the types of cases in which OsseoFuse has been used.
Yes.
A six-year retrospective multicenter report evaluated 258 OsseoFuse HexaPlus implants in 95 patients and reported a 97.28% cumulative long-term survival rate. The study included real-world cases such as fresh extraction sites and patients with active periodontal disease.1
Additional published literature describes the OneDrill® system, Step-Locking, immediate implant placement, SinusFuse, hydraulic sinus elevation, osseotransportation and immediate reimplantation protocols.2,6,9
Clinical outcomes always depend on patient, site, clinician and treatment factors, so these publications should be evaluated on their own methodology and scope.
No implant system is suitable for every patient.
Medical status, bone quantity and quality, anatomical limitations, periodontal condition, medications, smoking, oral hygiene, restorative requirements and other risk factors must still be assessed individually.11
What OsseoFuse can offer is a workflow with fewer drilling steps, fewer instrument changes and a design focused on obtaining primary stability. These attributes may be useful when reducing surgical complexity and chair time is desirable.
The six-year HexaPlus study is notable because its 95-patient population was medically diverse and included smokers and patients with high blood pressure, diabetes, asthma and COPD. This demonstrates documented use in a real-world medically diverse population, but it does not mean every patient with those conditions is automatically a candidate.1
No.
OneDrill® was developed to reduce the number of drilling steps, instrument changes and decisions required during site preparation. OsseoFuse also provides defined surgical protocols for different clinical situations.
Its lateral-cutting capability adds corrective freedom during osteotomy preparation, while the simplified instrument sequence reduces workflow complexity.
For clinicians earlier in their implant experience, those characteristics can make the system easier to learn and manage. OsseoFuse's current OneDrill® materials specifically describe fewer steps and fewer instruments as helping to flatten the learning curve.
That does not replace appropriate implant education or surgical competency.
Product information: OsseoFuse OneDrill® System and learning curve ↗
Specific OsseoFuse systems have received U.S. FDA 510(k) clearance.
The OsseoFuse Dental Implant System was cleared under K131748, and the HexaPLUS S OneDrill Implant System received clearance under K243078 in October 2025.10
Clearance applies to the specific products and indications described in the applicable 510(k). It should not be interpreted as blanket clearance for every OsseoFuse product or every clinical technique.
See how OsseoFuse can simplify instrumentation, inventory, training and everyday implant workflow.
No.
The OsseoFuse Master Surgical Kit is designed to support multiple OsseoFuse implant systems within a single kit, including HexaPLUS, ConicalPLUS, OneBody, Element Z-40, Mini and SinusFuse.
That can reduce the need to purchase, store, sterilize and maintain a separate surgical kit for every implant family.
One system. One master kit. Less equipment to manage.
Product information: OsseoFuse Master Surgical Kit ↗
That is one of the main objectives of the system.
The combination of implant-matched OneDrill®, a standardized platform strategy and a Master Surgical Kit reduces duplication across drilling instruments, surgical components and restorative inventory.
For a practice, the benefit can extend beyond the purchase price of an implant. Fewer SKUs can mean simpler ordering, easier stock control, fewer instruments on the surgical tray, less sterilization complexity and easier training for the clinical team.
Product information: OsseoFuse system architecture ↗ · OneDrill® inventory advantages ↗
The system is specifically designed to move in the opposite direction.
OsseoFuse's One Platform philosophy standardizes the restorative connection across compatible implant diameters, reducing the number of different prosthetic components a clinic may need to maintain.
Specific component compatibility should still be confirmed for the implant family and restorative component being used.
Product information: OsseoFuse platform and prosthetic compatibility ↗
You should not change implant systems simply because another implant exists.
The reason to evaluate OsseoFuse is whether it can solve problems that still exist in your current workflow:
fewer drills, fewer instrument changes, high primary stability, intraoperative angle correction, an integrated sinus solution, a planned reimplantation contingency, one restorative platform strategy and one Master Surgical Kit.
Those advantages become particularly relevant when your practice is placing more implants, performing immediate cases, managing sinus cases or trying to simplify inventory and team workflow.
The question is not just:
“Does my current implant system work?”
It is:
“How much complexity do I still need in order to achieve the result?”
Fixture price is only one part of the cost of an implant workflow.
A meaningful comparison should also consider drills, surgical kits, prosthetic components, inventory holding, sterilization, instrument changes, staff training and chair time.
The OsseoFuse value proposition is therefore not simply the cost of one fixture. It is the potential value of 1 Drill, 1 Platform and 1 Kit across the workflow.
Actual total cost will vary according to a clinic's purchasing structure, case mix and implant volume.
Start with the workflow, not just the fixture.
OsseoFuse training can cover OneDrill® selection, Step-Locking, implant placement, immediate extraction protocols, SinusFuse case selection, restorative components and case-specific SOPs.
For clinicians new to the system, supported first cases and structured training can make the transition more predictable.
READY TO EXPLORE OSSEOFUSE?
One drill. One platform. One kit. Explore the clinical thinking behind OsseoFuse or speak with our team about your first case.
Keep Implant Simple.
Clinical and technical statements on this website are supported, where indicated, by OsseoFuse-specific publications, independent scientific literature and applicable regulatory records. Evidence strength varies by study design. Retrospective studies, case reports, technique articles, laboratory studies and preclinical research should be interpreted within their respective limitations.
Clinical and technical information on this website is intended primarily for dental professionals. Patient-facing information is provided for general educational purposes and does not replace consultation, diagnosis or individualized treatment planning by a qualified dental professional.